Philips VL500 Wash Luminaires Service Manual page 69

Main Control PCB/Fan Assembly Replacement
(continued)
Menu
Display
Yoke Arm
Cover
Main Control PCB
Step 7. Remove Main Control PCB/Fan Assembly.
Step 8. Replace Main Control PCB/Fan Assembly by following Steps 2 through 7 in reverse
Step 9. Configure Main Control PCB using menus as needed.
02. 96 85. 001 0 A
Display PCB
1/4" Hex (13/16" Long)
Standoff (x4)
Main Control PCB
Figure 24: Main Control PCB/Fan Replacement
order.
21-May-2009
6-32x1/4" PPB (x4)
1/4" Hex (9/32" Long)
Standoff (x4)
NOTE:
Some components not shown for clarity.
2
M :
AINTENANCE
51