Amputee Legrest/External Push Handles - Invacare XLT Power U-front Service Manual

1-2.
1.
2.
A
34
AMPUTEE LEGREST
1. Attach the legrests by pushing the tube at the
2. Slacken lever (A), on the cushion's mount ing, in
B
A
EXTERNAL PUSH HANDLES
Adjusting the height of the push handles
1. To raise or lower the height of the push han-
2. When hole (A) is visible, just above the attachment,
upper part of the legrests down into the tubes on
the wheelchair. Lock the legrests by turning them
inwards.
order to adjust the cushion's angle and height.
Slacken screws (B) under the cushion, in order to
adjust the cushion depth.
dles turn the knob and raise the handles to the
required height. Tighten when the correct posi-
tion is achieved.
the handle will be in the right "locking-position".
Make sure the push handles care securely
locked before use.
INVACARE XLT Service Manual
®