Tool List - Invacare XLT Power U-front Service Manual

38
Accessories
Lubricate all movable parts if they are sticking or squeaking with a dry teflon
based spray, e.g. Viso 900-B5.
Screws and nuts: Check that all screws and nuts are tight.
Head- and Head support with cheak supports: Check that the side and
angle adjustment for the "wings" work. Also check that there is a memory
function (after 2005).
Neck support: Check that there is a memory function (after 2005).
Trunk support Multi functional from 2005: Check that the angle adjust-
ment works and that there is a memory function.
Abduction cushion: Check that the depth adjustment works (before
2005).

Tool List

To ajust:
Leg rests - 4 mm Allen key, 5 mm Allen key, 10 mm fixed spanner
Calf pads/footrests - 5 mm Allen key
Footrests one-piece - 4 mm Allen key, 10 mm fixed spanner
Backrest - 4 mm Allen key, 10 mm fixed spanner, 24 mm fixed spanner
Armrest/mudguards - 3 mm Allen key, 5 mm Allen key
Rear wheels - 5 mm Allen key, 10 mm fixed spanner, 24 mm fixed spanner
Brakes - 5 mm Allen key
Castor wheels - 4 mm Allen key, 5 mm Allen key, 10 mm fixed spanner
Anti-tip device - 4 mm Allen key
Trunk support - 4 mm Allen key, screw driver, 13 mm fixed spanner
One-arm drive - 4 mm Allen key, 10 mm fixed spanner
Anti-tip device, for one-arm drive - 4 mm Allen key, 5 mm Allen key
Assistant manoeuvred drumbrakes - 5 mm Allen key, 22 mm fixed spanner
Headrest, neckrest - 5 mm Allen key, 10 mm fixed spanner
INVACARE XLT Service Manual
®