Changing User Rights - GE NX-10 User Manual

Table of Contents

You can set a user's rights to arm, disarm, control outputs, send reports and bypass zones. You can also set the user's code to be a master

code and specify the partitions the user can access. To do this, press OK and enter a master user code. In a new system the User 1 is the

master user by default. Navigate with the

1. A list of all users is displayed. They are displayed in groups of 10.

2. Select the user group. Navigate with the

number and press OK.

To select the functions a user can perform

•

Navigate with the

keys to Authority and press OK. A list of user

rights is displayed. See the glossary for more information.

•

Scroll through the list of rights and press OK to assign rights to the

selected user. Select NO to return to the selected user number.

Important: When Control Outputs authority is selected for the user, this

user loses his/her master user rights, and is not able to edit any user

information! Remember to set this authority for regular user codes only!

To select the partitions a user can access

•

Navigate with the

keys to Partitions and press OK. The partitions

the user can access are listed.

•

Press a partition number to assign it to the selected user. Press the

number again to unassign the partition. Press OK.

Changing user rights

keys to Users and press OK.

keys to the relevant user

........

Users 1 - 10

+(1) John Murphy

........

Partitions

1 _ 3 4

NX-10 User Manual

Table of Contents

Show Quick Links

Table of Contents