Crestron TPMC-4SM Operations & Installation Manual page 23

Crestron TPMC-4SM
Operations & Installation Guide – DOC. 6845A
®
Isys i/O
On the main "Diagnostics" screen, touch Sensor Test to display the "Diagnostics –
Sensor Tests" screen. If contact sensors are connected to the TPMC-4SM, the
respective indicator will change from Inactive to Active as appropriate for each
sensor's activity. Similarly, the TPMC-4SM's own proximity sensor's indicator will
change from Inactive to Active when the TPMC-4SM senses motion in front of the
unit. Touch Back to return to the main "Diagnostics" screen.
"Diagnostics – Sensor Tests" Screen
On the main "Diagnostics" screen, to perform a test of the TPMC-4SM's built-in
microphone, touch Mic Test. The button label will change to
RECORDING/PLAYBACK. Speak into the microphone on the front of the
TPMC-4SM and your voice will be played back to confirm the microphone is
functioning. After playback, the button will revert to its original Mic Test label.
Touch Back to return to the "Panel Setup Options" screen.
RoomView Mode / User Project Mode
On the "Panel Setup Options" screen, RoomView Mode button toggles between this
mode and User Project Mode. RoomView Mode is the default state for using the
TPMC-4SM with the RoomView Interface. For more information, refer to the latest
version of the TPMC-4SM RoomView Interface Operations Guide (Doc. 6846).
Save & Exit
On the "Panel Setup Options" screen, touch Save & Exit to save all settings, exit the
setup screens and return to the main project.
®
Wall Mount Touchpanel Media Center: TPMC-4SM • 19
Isys i/O
Wall Mount Touchpanel Media Center