Crestron TPMC-4SM Operations & Installation Manual page 17

Crestron TPMC-4SM
Operations & Installation Guide – DOC. 6845A
®
Isys i/O
On-Screen Keyboard for IP Address / Hostname
Touch OK to add the entry or CANCEL to cancel it. When you are returned to the
"Edit Control System Settings" screen, touch Save to keep the new setting or Cancel
to cancel it.
On the TPMC-4SM, DHCP is enabled by default. To switch to a static IP address,
touch IP Address Settings on the "Ethernet Setup" screen, to access the "Edit IP
Address Settings" screen.
"Edit IP Address Settings" Screen
Touch the Enabled/Disabled button to toggle between DHCP enabled and disabled.
Then touch the field for the Static IP Address, Static Subnet Mask or Static Default
gateway you wish to enter. The on-screen keyboard will appear. After entering the
addresses, touch OK to add the entries or CANCEL to cancel them.
On the "Edit IP Address Settings" screen, touch Edit DNS Servers to enter the
screen for editing these addresses.
Touch Save to keep the new setting or Cancel to cancel it.
®
Wall Mount Touchpanel Media Center: TPMC-4SM • 13
Isys i/O
Wall Mount Touchpanel Media Center