Timer Setting - Ricoh Aficio2090 General Settings Manual

User Tools (System Settings)
❖ ❖ ❖ ❖ ADF Original Table Elevation
You can set the timing for elevating the ADF original table.
Note
❒ Default: When original is Set
❖ ❖ ❖ ❖ ADF Feed Speed
When you use thick paper, you can slow down the printing speed to avoid
fusing the image by selecting [Slow].
Note
❒ Default: Normal
❖ ❖ ❖ ❖ Optimum for Thick Paper
You can set the optimum for thick paper to On or Off.
❖ ❖ ❖ ❖ <F/F4>Size Setting
You can specify the paper size for F/F4.
5
Note
❒ Default: 8

Timer Setting

❖ ❖ ❖ ❖ Auto Off Timer
The machine turns off automatically to conserve energy after a specified
amount of time has passed following job completion. This function is called
"Auto Off". The machine status after Auto Off operation is called "Off mode"
or "Sleep mode".
For Auto Off Timer, specify the time to elapse before Auto Off is activated.
Note
❒ Default: 90 minutes (Type 2: 120 minutes)
❒ Auto Off Timer function will not operate if an error message appears.
❒ The time can be set from 10 seconds to 240 minutes using the number keys.
❖ ❖ ❖ ❖ Energy Saver Timer
Set the amount of time the machine waits before switching to Low Power
mode after copying has finished or the last operation is performed.
Note
❒ Default: 15 minutes
❒ The time can be set from 10 seconds to 240 minutes using the number keys.
68
× 13
1
/
2