Accessing User Tools (System Settings); Changing The Default - Ricoh Aficio2090 General Settings Manual

User Tools (System Settings)

Accessing User Tools (System Settings)

This section is for key operators in charge of this machine. You can change or set
default settings.
Note
❒ Setting operations with the user tools are done in a completely different mode
from that of ordinary operations. Be sure to return to the normal operating
mode when you finish making settings. See p.63 "Exiting User Tools".
❒ Any changes you make with User Tools remain in effect even if the main
power switch or operation switch is turned off, or the { { { { Clear Modes} } } } key is
pressed.

Changing the Default

5 Note
❒ When the key operator code has been set, the key operator code input screen
appears when you attempt to change the initial settings. Enter the registered
key operator code. For details about key operator codes, see p.71 "Key Oper-
ator Tools".
A A A A
Press the { { { { User Tools} } } } key.
User Tools Main Menu is displayed.
B B B B
Press [System Settings].
The System Settings screen is displayed.
62
ZJBS050E