Safety Information; Recognize Safety Information; Understand Signal Words; Follow Safety Instructions - Cornelius 500-Series Installation And Service Manual

Recognize Safety Information

This is the safety-alert symbol. When you see this
symbol on our machine or in this manual, be alert to
the potential of personal injury.
Follow recommended precautions and safe operating
practices.

Understand Signal Words

A signal word - DANGER, WARNING, CAUTION is
used with the safety-alert symbol. DANGER identifies
the most serious hazards.
Safety signs with signal word DANGER or WARNING
are typically near specific hazards.
General precautions are listed on CAUTION safety
signs. CAUTION also calls attention to safety mes-
sages in this manual.

Follow Safety Instructions

Carefully read all safety messages in this manual and on your machine safety signs. Keep safety signs in
good condition. Replace missing or damaged safety signs. Learn how to operate the machine and how to
use the controls properly. Do not let anyone operate the machine without instructions. Keep your machine in
proper working condition. Unauthorized modifications to the machine may impair function and/or safety and
affect the machine life.
CAUTION: Very high discharges pressure is present in system. Quick disconnects on your
gages will minimize danger and loss of refrigerant.
CAUTION: Unit requires separate electrical line. See instruction manual for proper fuse
size.
WARNING: There must be adequate clearance around icemaker. Allow minimum 6" air
intake and 4" air exhaust for air exhaust and panel removal.
NOTE: Unit must be installed per local plumbing and electrical codes. See Installation manual for
unit requirements. Failure to do so may cause damage to unit, which would void unit warranty.
NOTE: Using any parts other than genuine factory manufactured parts relieves the manufacturer of all
liability.
NOTE: Manufacturer reserves the right to change specifications at any time.

SAFETY INFORMATION

1
DANGER
WARNING
CAUTION
638085278