User Engineering Mode Simple - Vision Fitness Simple User Manual

USER ENGINEERING MODE
(SIMPLE CONSOLE Only)
Your Treadmill offers a User Engineering Mode that can access certain
data and help to troubleshoot your Treadmill. The User Engineering Mode
is designed for you to access functions that will not affect important
Treadmill settings. To access this mode, please hold down the SPEED
DOWN and SELECT buttons while the Treadmill is at the startup mode.
When in User mode, "USEr" will be displayed in the data window. Use
either set of arrow keys to access the available functions/data. Press
SELECT to select the data/function. To save data, hold down the SELECT
button until the Treadmill beeps. To exit, press STOP.
UNITS
P6 represents units, Metric or English. You can change this configuration
for your Treadmill. When you enter P6, the large window shows the model
number and the small window shows the units. An even number represents
English units (miles/mph), and an odd number represents Metric units
(kilometers/kph). You can change the number using either set of arrow
keys. Press and hold SELECT to save the data.
MAXIMUM TIME
P7 represents the maximum time the treadmill can be used (shown as
minutes:seconds). Use the arrow keys to change the time. To save the time,
hold down the SELECT button until there are two beeps.
DEFAULT WEIGHT
P8 represents the default weight. You can change this configuration for
your treadmill. To modify the weight, press the arrow keys. To save the
new default weight, hold down the SELECT button until there are two
beeps
ACCUMULATED TIME
P9 represents accumulated time in hours. This information is for viewing
only; the data can not be modified.
37