User Engineering Mode - Vision Fitness T10 Owner's Manual

USER ENGINEERING MODE

Your treadmill offers a User Engineering Mode that can access
certain data and help to troubleshoot your treadmill. The User
Engineering Mode is designed for you to access functions that will
not affect important treadmill settings. To access this mode, please
hold down the SPEED DOWN and ENTER keys while the treadmill
is at the start-up mode. When in User mode, "USER" is displayed
in the data window. Press ENTER. Use either set of arrow keys to
access the available functions/data. Press ENTER to select the data/
function. To save data, hold down ENTER until the treadmill beeps.
To exit, press STOP.
UNITS
P6 represents units, Metric or English. You can change this
configuration for your treadmill. When you enter P6, the large
window shows the model number and the small window shows the
units. An even number represents English units (miles/mph), and
an odd number represents Metric units (kilometers/kph). You can
change the number using the SPEED arrow keys. Press and hold
ENTER to save the data.
MAxIMUM TIME
P7 represents the maximum time the treadmill can be used (shown
as minutes:seconds). Use the number keys or the SPEED arrow keys
to change the time. To save the time, hold down ENTER until there
are two beeps.
DEFAULT WEIGHT
P8 represents the default weight. You can change this configuration
for your treadmill. To modify the weight, use the number keys or
press the SPEED arrow keys. To save the new default weight, hold
down ENTER until there are two beeps
ACCUMULATED TIME
P9 represents accumulated time in hours. This information is for
viewing only; the data cannot be modified.
ACCUMULATED DISTANCE
P10 represents accumulated distance, either in miles or kilometers.
This information is for viewing only; the data cannot be modified.
13