Mid-Mounting An E4G-400 Router In A Two-Post Rack - Extreme Networks E4G Series Hardware Installation Manual

Installing the E4G-400 Cell Site Aggregation Router

Mid-Mounting an E4G-400 Router in a Two-Post Rack

To mid-mount an E4G-400 router:
1 On each side of the router, use six screws to attach a bracket to the router (Figure 28).
Figure 28: Rack-mounting Bracket for Mid-Mount Installation
CSR_002
2 Slide the router into the equipment rack (Figure 29).
Figure 29: Installing the E4G-400 Router (Mid-mount)
CSR_003
3 Insert and tighten rack-mounting screws to secure the router to the rack.
To install the power supply, see "Installing an AC Power Supply" on page 59 or "Installing a DC Power
Supply" on page 60.
E4G Series Routers Hardware Installation Guide
57