Table of Contents
Advertisement
Four 100/1000BASE-X (SFP) ports
●
These ports require Extreme Networks optical modules that are designed for use within the
temperature range of the router.
Slot for hot-swappable clock module
●
Slot for hot-swappable T1/E1 module with 16 ports
●
Grounding lug
●
Redundant DC input power connectors
●
Figure 2: E4G-200 Cell Site Router Front Panel
1
2
3
7
8
1 = Alarms connection
2 = Management and console ports
3 = RJ-45 dedicated ports
4 = SFP ports
E4G-200-12x Cell Site Router Overview
The Extreme Networks E4G-200-12x router provides 12 Gigabit SFP ports and 16 T1/E1 ports in a
compact 1RU unit. The Ethernet ports support both IEEE 1588v2 and Synchronous Ethernet (SyncE)
timing, and the T1/E1 ports support time division multiplexing (TDM) timing.
The E4G-200-12x router provides high-performance pseudowire capability, supporting both CESoPSN
(channelized) and SAToP (unframed and unchannelized) TDM services. Deployed at the cell site, the
E4G-200-12x cell site router collects traffic from 2G, 3G, and 4G radio towers for handoff to the mobile
backhaul over fiber or microwave.
The E4G-200-12x router's extended temperature range of -40°C to +65°C allows service providers to
deploy the E4G-200-12x router at sites without climate control.
The E4G-200-12x cell site router front panel
Alarms port implemented as a DB-15 connector.
●
For details about the connector, see
Management and console ports
●
12 100/1000BASE-X (SFP) ports
●
These ports require Extreme Networks optical modules that are designed for use within the
temperature range of the router.
Slot for hot-swappable clock module
●
Slot for hot-swappable T1/E1 module with 16 ports
●
E4G Series Routers Hardware Installation Guide
4
5
5 = Slot for E4G-200 CLK module
6 = Slot for F16T1E1 module
7 = Grounding lug
8 = DC input power connectors
(Figure
3) has the following features:
"E4G-200 Series Connector Pinouts" on page
E4G-200 Series Cell Site Routers
6
CSR_020
126.
15
Advertisement
Table of Contents
