A
A P P E N D I X
WARNING!
Read the safety information in this appendix thoroughly before installing Extreme Networks products.
Failure to follow this safety information can lead to personal injury or damage to the equipment.
Only trained and qualified service personnel (as defined in IEC 60950-1 and AS/NZS 3260) should
install, replace, or perform service to Extreme Networks switches and their components. Qualified
personnel have read all related installation manuals, have the technical training and experience
necessary to be aware of the hazards to which they are exposed in performing a task, and are aware of
measures to minimize the danger to themselves or other persons.
If you are in the USA, install the system in accordance with the U.S. National Electrical Code (NEC).
This appendix includes the following sections:
Considerations Before Installing on page 96
●
General Safety Precautions on page 96
●
Maintenance Safety on page 97
●
Cable Routing for LAN Systems on page 97
●
Installing Power Supply Units and Connecting Power on page 98
●
Selecting Power Supply Cords on page 99
●
Battery Replacement and Disposal on page 100
●
Fiber Optic Ports and Optical Safety on page 100
●
Safety Information for the E4G Series Routers on page 101
●
Sicherheitshinweise on page 102
●
E4G Series Routers Hardware Installation Guide
Safety Information
(safety information in German)
95