Dvr Server; Dual Streaming Support - Eyemax 9030 Manual

DVR Server

Supported Network:
1. TCP/IP - Connecting to DVR Server from Client using Lan or DSL
2. PSTN - Connecting to DVR Server from Client using PSTN or ISDN modem
3. Not In Use - Not allowed to connect to DVR Server remotely
Port No.: The default port number is 9091.
Timeout: The time length of trials to connect to DVR Server from Client
Maximum Number of Users: The maximum number of users that can be logged in remotely.
Details: It shows all the port numbers that are available to use.
Note:
DVR will automatically appoint a proper IP address to router. No router setup required.

Dual streaming support

Transmitted Video Quality:
Video quality to be transmitted to Client.
As a reminder, the higher video quality gets, the slower network transmission speed becomes.
Therefore, it is often recommended to select low video quality when using "Narrowband".
Bandwidth:
Make sure to select the right bandwidth to have the right network performance.
By default, Magic Radar support VBR (Variable Bit Rate
Only X948 (H.264 Hardware compression) support CBR (Constant Bit Rate)
Notice!: Software H.264 version doesn't support dual streaming.
Therefore to use dual streaming function, it is recommended to use MPEG4 software
or Hardware codec H.264 capture card.
Main System Application(Control)
[ EyeMax Series ] User's Manual (5.5.4.0)
63