Eyemax 9030 Manual page 40

How to Set up:
1. Set Count Interval.
2. Set zone by dragging mouse.
3. If a directional counting is needed, select one.
Motion Detection: Counting by Motion Detection.
Input Device: Counting by Input Device such as sensor.
Reset Everyday: Tick box to reset everyday automatically.
Interval (Sec.): Counting interval from the time object is detected.
Check Movement from 1st Zone to 2nd: Counting based on the direction a place to another.
Check Movement from 2nd Zone to 1st: Counting based on the direction a place to another.
Set: Set the first zone.
Set 2nd Zone: Set the second zone to be detected.
Clear: Clear the zone selected.
Setting All: Selects all areas on the screen.
Clear All: Clear all zones selected.
Main System Application(Control)
[ EyeMax Series ] User's Manual (5.5.4.0)
39