18
Channel Relocation
Camera location can be changed by drag & drop by mouse.
How to configure channel by drag & drop:
1. Select channel: click mouse button.
2. Hold on mouse button and drag over to target channel
3. Release mouse button over the target channel.
4. You will see the location of channel has changed on
(Refer to above picture)
(2) Right click menu on screen
On control tab, click right mouse button to open shortcut menu.
TV-OUT: Enable selected channel to TV out 2 manually.
Adjust Color: Adjust color setting of selected channel
OSD: Enable/Disable OSD on screen.
(Camera Information/Detection Zone)
Preset / Tour: This is to Add Preset and Tour.
Recording On: Enable force recording on selected channel
Quick Search: Playback selected channel by pop-up screen.
Instant Search: Playback selected channel on screen
(Before 10/20 seconds)
Camera position to its original position:
Revert to default channel location.