Eyemax 9030 Manual page 44

Main System Application(Control)
43
[PTZ Control by Drag and Drop]
How to Set Up:
1. Simply ticks "Using PTZ Mouse Control" as above and select a proper PTZ model name.
2. On a PTZ screen, drag mouse to the desired position to see.
[Virtual Keypad for Speed Dome Camera]
How to Set Up:
1. Select "SpeedDome Camera/TBT INC." protocol to run Virtual Keypad.
2. Set proper Camera ID, Port, Bit per Second, and etc.
3. Click right mouse button on PTZ Screen and select " PTZ Keypad".
Click on "Menu" to go into Camera OSD.
Once preset and touring have been set through this virtual keypad, they must be controlled by the
keypad.(Menu buttons on GUI will not work.)
For example, when preset 1 is set, press 1 on the keypad and "Preset". Then it moves to the Preset No.
1 position.
Note: Now only limited Speed Dome models are available to run this keypad.
[ EyeMax Series ] User's Manual (5.5.4.0)