KitchenAid 30" Freestanding Range Installation Instructions Manual

KitchenAid 30" Freestanding Range Installation Instructions Manual

30" (76.2 cm) sealed burner gas range with self-cleaning thermal/convection oven


Installation Instructions
30" (76.2 cm) Sealed Burner Gas Range
Tip Over Hazard
A child or adult can tip the range and
be killed.
Connect anti-tip bracket to rear
range foot.
Reconnect the anti-tip bracket, if the
range is moved.
Failure to follow these instructions can
result in death or serious burns to
children and adults.
Read and save these instructions.
Installer: Leave Installation
Instructions with the homeowner.
Homeowner: Keep Installation
Instructions for future reference.
Read and save these instructions
for local electrical inspector's use.
with self-cleaning thermal/convection oven
Write down the model and serial
numbers before installing range.
Both numbers are listed on the
model/serial rating plate located
on the oven frame behind the
storage drawer panel.
Model # _______________________________
Serial # _______________________________
Quick Reference
Table of Contents:
Before you start
Electrical requirements
Gas supply requirements
Product dimensions
Cabinet dimensions/requirements
Installation steps
7 - 10
If range does not operate
Moving the range
If you need assistance/service
Part No. 9758571


Table of Contents

Summary of Contents for KitchenAid 30" Freestanding Range

  • Page 1 Moving the range Failure to follow these instructions can result in death or serious burns to If you need assistance/service children and adults. IMPORTANT: Read and save these instructions. Write down the model and serial IMPORTANT: numbers before installing range.
  • Page 2: Before You Start

    Before you start... It is the customer’s responsibility: Your safety and the safety of WARNING: If the • To contact a qualified electrical installer. others are very important. information in this manual • To assure that the electrical installation We have provided many important safety is not followed exactly, is adequate and in conformance with messages in this manual and on your...
  • Page 3: Tools Needed

    Tools needed: Materials needed: Parts supplied: Assemble the required tools and parts • gas line shutoff valve before starting installation. Read and • 1/2" male pipe thread nipple for connection Not shown: follow the instructions provided with any to pressure regulator •...
  • Page 4: Gas Supply Requirements

    Gas supply requirements Observe all governing codes and Rigid pipe WARNING ordinances. connection: Requires a This installation must conform with local combination of codes and ordinances. In the absence of pipe fittings to local codes, installations must conform obtain an in-line connection to the range. with American National Standard, All strains must be removed from the National Fuel Gas Code ANSI Z223.1 —...
  • Page 5: Product Dimensions

    Product dimensions Grounded electrical outlet is required. See “Electrical requirements. ” Proper gas supply connection must be available. See “Gas supply requirements. ” 30" (76.2 cm) range width Freestanding Range 8-1/4" (21 cm) 36-1/8" (91.8 cm) cooktop height 44-3/8" (112.7 cm) 1"...
  • Page 6 Cabinet dimensions/requirements Cabinet opening dimensions shown are for: 25" (63.5 cm) countertop depth, 24" (61 cm) base cabinet depth, 36" (91.4 cm) countertop height 13" (33 cm) max. Freestanding or Slide-in Range For minimum upper cabinet depth 18" (45.7 cm) clearance to upper side cabinet cooktop, see...
  • Page 7 Slide-in ranges: Now start... countertop WARNING preparations Check that the type of gas supply is correct for this range. (See model/serial Excessive Weight Hazard rating plate.) If connecting to L.P . gas, The cooktop sides of the slide-in range fit follow directions in Conversion Kit Use two or more people to move and over the cutout edge of your countertop.
  • Page 8 Operating position Make sure the anti-tip bracket Move range close to cabinet Place rack in oven. Place level is installed: opening. on rack, first side to side; then front to • Look for the anti-tip bracket securely back. attached to floor. If range is not level, pull range forward Remove cardboard or •...
  • Page 9: Check Operation

    Loosen the locking Top burner flame appearance burner does not light at this point, screw and rotate the air shutter until the contact your KitchenAid dealer or proper flame appears. Tighten locking authorized service company for screw.
  • Page 10: Moving The Range

    Press the “CANCEL/OFF” pad. If your new range. To get the the broil burner flame needs adjustment, most efficient use from your contact your KitchenAid dealer or range, read your Use & Care Close the oven door. Press the authorized service company for “BROIL ”...
  • Page 11: Requesting Assistance Or Service

    • Use and maintenance procedures in your correspondence. • Accessory and repair parts sales • Specialized customer assistance KitchenAid Canada Appliance Service – Consumer Services (Spanish speaking, hearing impaired, limited vision, etc.) Direct service branches: • Referrals to local dealers, service...
  • Page 12 HOME APPLIANCES Part No. 9758571 © 2004 KitchenAid Printed in U.S.A. ® Registered Trademark of KitchenAid. Prepared by KitchenAid, Benton Harbor, Michigan 49022 02/2004...

This manual is also suitable for:

30" slide-in range

Table of Contents