Upnp And Zyxel; Configuring Upnp - ZyXEL Communications P-660R-F1 series User Manual

All UPnP-enabled devices may communicate freely with each other without additional configuration.
Disable UPnP if this is not your intention.

14.2 UPnP and ZyXEL

ZyXEL has achieved UPnP certification from the Universal Plug and Play Forum UPnP™
Implementers Corp. (UIC). ZyXEL's UPnP implementation supports Internet Gateway Device (IGD)
1.0.
See the following sections for examples of installing and using UPnP.

14.2.1 Configuring UPnP

Click Advanced > UPnP to display the screen shown next.
See Section 14.1 on page 174
Figure 106 Configuring UPnP
The following table describes the fields in this screen.
Table 68 Configuring UPnP
LABEL
Active the Universal Plug
and Play (UPnP) Feature
Allow users to make
configuration changes
through UPnP
Apply
Cancel
P-660R-F1 Series User's Guide
for more information.
DESCRIPTION
Select this check box to activate UPnP. Be aware that anyone could use
a UPnP application to open the web configurator's login screen without
entering the ZyXEL Device's IP address (although you must still enter
the password to access the web configurator).
Select this check box to allow UPnP-enabled applications to
automatically configure the ZyXEL Device so that they can
communicate through the ZyXEL Device, for example by using NAT
traversal, UPnP applications automatically reserve a NAT forwarding
port in order to communicate with another UPnP enabled device; this
eliminates the need to manually configure port forwarding for the UPnP
enabled application.
Click Apply to save the setting to the ZyXEL Device.
Click Cancel to return to the previously saved settings.
Chapter 14 Universal Plug-and-Play (UPnP)
175