Changing Login Password - ZyXEL Communications P-660R-F1 series User Manual

Chapter 2 Introducing the Web Configurator
Table 6 Status: Packet Statistics (continued)
LABEL
Status
TxPkts
RxPkts
Errors
Tx B/s
Rx B/s
Up Time
Collisions
Help
Poll Interval(s)
Set Interval
Stop

2.4.5 Changing Login Password

It is highly recommended that you periodically change the password for accessing the ZyXEL
Device. If you didn't change the default one after you logged in or you want to change to a new
32
DESCRIPTION
This field displays Down (line is down), Up (line is up or connected) if you're
using Ethernet encapsulation and Down (line is down), Up (line is up or
connected), Idle (line (ppp) idle), Dial (starting to trigger a call) and Drop
(dropping a call) if you're using PPPoE encapsulation.
For the WLAN port, it displays the transmission rate when WLAN is enabled or
N/A when WLAN is disabled.
This field displays the number of packets transmitted on this port.
This field displays the number of packets received on this port.
This field displays the number of error packets on this port.
This field displays the number of bytes transmitted in the last second.
This field displays the number of bytes received in the last second.
This field displays the elapsed time this port has been up.
This is the number of collisions on this port.
Click this button to bring the help screen.
Type the time interval for the browser to refresh system statistics.
Click this button to apply the new poll interval you entered in the Poll Interval
field above.
Click this button to halt the refreshing of the system statistics.
P-660R-F1 Series User's Guide