Lan Client List - ZyXEL Communications P-660R-F1 series User Manual

Table 20 DHCP Setup
LABEL
Remote DHCP Server If Relay is selected in the DHCP field above then enter the IP address of the
DNS Server
DNS Servers
Assigned by DHCP
Server
Primary DNS Server
Secondary DNS
Server
Apply
Reset

5.5 LAN Client List

This table allows you to assign IP addresses on the LAN to specific individual computers based on
their MAC Addresses.
Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address is
assigned at the factory and consists of six pairs of hexadecimal characters, for example,
00:A0:C5:00:00:02.
To change your ZyXEL Device's static DHCP settings, click Network > LAN > Client List. The
screen appears as shown.
Figure 37 LAN Client List
P-660R-F1 Series User's Guide
DESCRIPTION
actual remote DHCP server here.
The ZyXEL Device passes a DNS (Domain Name System) server IP address to
the DHCP clients.
This field is not available when you set DHCP to Relay.
Enter the IP addresses of the DNS servers. The DNS servers are passed to the
DHCP clients along with the IP address and the subnet mask.
If the fields are left as 0.0.0.0, the ZyXEL Device acts as a DNS proxy and
forwards the DHCP client's DNS query to the real DNS server learned through
IPCP and relays the response back to the computer.
Click Apply to save your changes back to the ZyXEL Device.
Click Reset to begin configuring this screen afresh.
Chapter 5 LAN Setup
71