Creating A Qos Policy - Symbol ES3000 Manual

8.2.6 Creating a Qos Policy

After all of the required classifiers and policies have been specified, a QoS policy can be created. The
policy consists of a classifier, a sequence number, a port list, and one or more actions. The sequence
number determines the order in which the policies are applied. All rules apply, in order, that can apply.
If more than one QoS rule applies to a packet and if the QoS rules conflict in the actions to be taken,
then action take will be that of the last rule to be applied.
The policies are specified in the web interface, the menu interface (QoS > Policy Config. > Create
Policy), or using the
diffserv policy
diffserv policy <index> portlist <index> classifier <index>
policy-precedence <value> [inprofile <index>] [nomatch <index>]
[outprofile <index> ]
No more than twelve QoS policies may apply to a single port number.
command in the CLI. The format of the CLI command is:
8-9
QOS Management