Runtime Software; Make The Runtime Software Available On A Tftp Server; Download The Runtime Software - Symbol ES3000 Manual

2.4 Runtime Software

The runtime software for the switch can be installed from the serial interface, the telnet interface, or
the web interface. From the serial interface or the telnet interface, the installation procedure is the
same.

1. Make the runtime software available on a TFTP server.

2. Download the runtime software file.
2.4.1 Make the Runtime Software Available on a TFTP server
Symbol Technologies will make runtime software upgrades available through the Symbol support
pages on the web and, if needed, through other means of distribution. The PoE version of the ES3000
and the non-PoE version of the ES3000 require, at this time, different versions of the runtime
software.
Do not attempt to run PoE versions of the runtime
software on non-PoE versions of the switch or vice versa
or the switch may not be operable after the incorrect
runtime is installed.
After the runtime software is downloaded from Symbol Technologies, place the runtime software in
the service directory for any TFTP server on the same LAN as the ES3000 switch. There are many TFTP
servers available, some at no cost. The procedures in this section were tested using the Solar Winds
TFTP server for Windows, available at www.solarwinds.net.

2.4.2 Download the Runtime Software

To download the runtime software to the switch, using the menu interface, select "A" for System
Administration, "T" for Tools and "U" for Software Upgrade. The Software Upgrade screen will
display:
Tools -> Firmware Upgrade
Image Version/Date:
TFTP Server IP:
Image File Name:|
----------------------------- <COMMAND> --------------------------------
v1.0.0.0-909R / Apr 29 2004 17:25:09
0.0.0.0
ES3000 Software Management
2-7