Install The Bootcode - Symbol ES3000 Manual

2-6 ES3000 Advanced Concept Guide
>>> Software Upgrade Menu <<<
Set Remote [S]erver IP Address
Set Remote [F]ile Name
[D]ownload software and Execute
Download [B]ootcode and Execute
Download [P]oL controller image
[Q]uit to Previous Menu
Command>
Enter "S" for "Set Remote Server IP Address" and enter the IP address of the TFTP server. Enter "F"
for "Set Remote File Name" and then the name of the bootcode file. Finally, enter "B" for "Download
Bootcode and Execute." The bootcode will download and as it does the switch will show the number
of bytes received from the TFTP server.

2.3.5 Install the Bootcode

After the bootcode has been downloaded to the switch, the following screen will display:
Bytes received :
Downloading file was completed!
Checking Image file integrity ... OK
Version:
Date Time:
Do you want to update boot image? [Y/N]
To install the bootcode, answer "Y" and press "Enter". The system will then make a boot image of
the new bootcode and then reboot the switch:
Updating the boot image ... OK
Booting...
The bootcode for the switch has been updated.
780194
1.0.0.0-012R
Apr 26 2004 11:44:48