Table of Contents
Advertisement
■ Refresh: Click this button to refresh all current connections.
■ Add to deny list: You can select entries from the Connection Status list and add them to the Deny List
to deny access� Please note that those checked connections will only be disconnected temporarily
and will automatically try to re-link again (IE Explore or Quick Time Player). If you want to enable the
denied list, please check Enable access list filtering and click Save in the first column.
■ Disconnect: If you want to break off the current connections, please select them and click this
button� Please note that those checked connections will only be disconnected temporarily and will
automatically try to re-link again (IE Explore or Quick Time Player).
Enable access list filtering: Check this item and click Save if you want to enable the access list filtering
function�
Filter
There are two lists for permission control: Allowed list and Denied list� Only those clients whose IP
addresses are on the Allowed list and not on the Denied list can access the Network Camera� Please
note that the IPv6 access list column will not be displayed unless you enable IPv6 on the Network page�
For more information about IPv6 Settings, please refer to page 40 for detailed information�
■ Add a rule to Allowed/Denied list: Click Add to add a rule to Allowed/Denied list�
There are three types of rules:
Single: This rule allows the user to add an IP address to the Allowed/Denied list�
For example:
VIVOTEK
User's Manual - 53
Advertisement
Table of Contents
