Table of Contents
Advertisement
PARAMETER
VALUE
Method
addallow
adddeny
deleteallow
deletedeny
start
<ip address>
end
<ip address>
index
<value>
return
<return page>
Event/Control HTTP Tunnel Channel
Note: This request requires
Method: GET and POST
Syntax:
http://<servername>/cgi-bin/admin/ctrlevent.cgi
-------------------------------------------------------------------------
GET /cgi-bin/admin/ctrlevent.cgi
x-sessioncookie: string[22]
accept: application/x-vvtk-tunnelled
pragma: no-cache
cache-control: no-cache
DESCRIPTION
Add allowed IP address range to the server. Start and end
parameters must be specified. If the index parameter is
specified, it will try to add starting from the index position.
Add denied IP address range to the server. Start and end
parameters must be specified. If the index parameter is
specified, it will try to add starting from the index position.
Remove allowed IP address range from server. If start and end
parameters are specified, it will try to remove the matched IP
address. If index is specified, it will try to remove the address
from given index position. [start, end] parameters have higher
priority then the [index] parameter.
Remove denied IP address range from server. If start and end
parameters are specified, it will try to remove the matched IP
address. If index is specified, it will try to remove the address
from given index position. [start, end] parameters have higher
priority then the [index] parameter.
The starting IP address to add or to delete.
The ending IP address to add or to delete.
The start position to add or to delete.
Redirect to the page <return page> after the parameter is
assigned. The <return page> can be a full URL path or relative
path according to the current path. If you omit this parameter, it
will redirect to an empty page.
Administrator
privileges.
VIVOTEK
User's Manual - 127
Advertisement
Table of Contents
