Advertisement
Map Selection:
After the AccessPORT identifies the vehicle, it will present a list of maps for that vehicle. The
map selected will become the base map for the vehicle. To ensure the best performance,
select the map that most closely matches the modification level of the vehicle. Select a map and
press OK to view detailed information about that map. After confirming that the selected map is
correct, press OK again to proceed, or press CANCEL to return to the map selection list.
Save Stock ECU Program Data:
After confirming the installation map, the AccessPORT will download the current stock
ECU program data from the vehicle. The AccessPORT saves this data for use during the
Uninstall process to ensure that the vehicle is completely returned to stock. The download
process with take 8-9 minutes to complete.
Install AccessPORT Programming:
With the stock ECU data saved, the AccessPORT will proceed with installation to the vehicle. At
this point the AccessPORT reprograms the vehicle's ECU with new program data and calibration
parameters from the selected map file. This process will take around 10 minutes to complete.
Installation Complete:
Your screen should now display "Installation Complete". The AccessPORT is now successfully
installed. Remove the key from the ignition, place key back into the ignition, and start the
vehicle. The AccessPORT does not need to be plugged in to the vehicle again until a map
change is necessary, however, it can remain plugged in to use the Performance testing,
Live Data monitoring and Data Logging features. Please note that the AccessPORT is designed to
work with only one vehicle at a time. Once the AccessPORT is installed, it cannot be used with
another vehicle until it is uninstalled from the original vehicle.
Advertisement
