Advertisement
6. Without touching the clutch or brake pedal press the START button once to put the car into
the ON position.
7. Select Install to proceed with installation.
Do not disturb the AccessPORT or OBD-II cable while installation is taking place. Failure to
do so may result in incomplete ECU reprogramming which will render the vehicle inoperable.
Vehicle Identification:
The AccessPORT will attempt to automatically determine the target vehicle for installation.
If the AccessPORT successfully identifies the vehicle:
Verify that the identified vehicle is correct and press OK to confirm.
If an error occurs:
Please reference the Troubleshooting section of the AccessPORT User Manual for additional
information. The AccessPORT User Manual can be found online under the Manuals tab on
http://www.cobbtuning.com/bmw.
WARNING!
Advertisement
