APRILIA Scarabeo 500 Workshop Manual page 36

SCARABEO 500
TRIP RESET TRIP 1/TRIP 2
• Press and hold (MODE) button (1) for more than three
seconds when selected TRIP meter is displayed.
NOTE The displayed function will be reset.
The warning lights should be visible even when under direct
sunlight.
TURN INDICATORS
This light should use a green LED that turns on at the same
time as the turn indicators.
FUEL RESERVE
This light should use an orange LED that turns on when the
vehicle is using the fuel reserve.
OIL ALARM
This light should use a red LED that indicates oil pressure
alarm.
HIGH BEAM
This light should use a blue LED and should turn on when
the high beam is on.
EFI
This light should use a red LED and indicates failures of the
engine control unit.
EXTERNAL ANTITHEFT SYSTEM
This light should use a red LED and is piloted by a possible
external antitheft system (i.e. it is not managed by the
microprocessor)
GENERAL TECHNICAL INFORMATION
2 - 17