Removing The Front Cover - APRILIA Scarabeo 500 Workshop Manual

CYCLE PARTS
5.1.2.

REMOVING THE FRONT COVER

•
Position the vehicle on the centre stand.
•
Completely turn the handlebar to the right and
remove the top screw.
NOTE Proceed in the same way on the opposite side,
turning handlebar to the left.
•
Completely turn the handlebar to the right and
remove the bottom screw.
NOTE Proceed in the same way on the opposite side,
turning handlebar to the left.
•
Slightly raise the cover lower end and remove it by
sliding it out of the tabs.
WARNING
Proceed with care.
Do not damage the tabs and/or their seats.
When the front cover is removed you can gain access to:
- expansion tank;
- control unit;
- immobilizer;
- turn indicator lamps;
- voltage regulator,
- horn;
- relay
- bank angle sensor;
5 - 4
SCARABEO 500