Test Mode - Talea Giro And Odea - Saeco TALEA Service Manual

TALEA / ODEA - LINE
5.1.1.

Test mode - Talea Giro and Odea

• Press the hot water key (steam key on the Odea Go) and turn the appliance on at the same
time. Keep the hot water key or the steam key pressed until all four LEDs fl ash in the follow-
ing sequence
Rotary knob to
set cup capacity
Messages / Errors
Function
Hot water / steam valve (open)
Microswitch of brewing unit not activated (missing)
Dreg drawer's reed switch (missing)
Reed switch for doors (open)
Bean hopper cover's reed switch (missing)
Flowmetre pulses
(when the pump is active)
Microswitch of milk carafe presence
(hot water / steam valve closed)
Water tank's sensor (no water)
Residual water tray's sensor (full)
Saeco International Group
(anticlockwise)
Odea Go only
X
X
X + hot water /
steam valve open
X
X
X
X
05 SERVICE MODALITY
not with
Function
Odea Go
Electrical valve
X Coffee grinder
Letting steam out
with new software
Heating
Brewing unit
(home position
gear microswitches
activated)
Pump fl owmetre
pulses
Brewing unit
(brewing position
gear microswitch)
Dosing quantity setting for coffee quan-
tity test in test mode.
=90 pulses =100 pulses
=110 pulses
Signal Display
lit
fl ashing
fl ashing
fl ashing
fl ashing
fl ashing
lit
lit
lit
Display
Page 1 / 17