Troubleshooting; Test Mode - Saeco New Royal HD 8930 Service Manual

NEW ROYAL
5.1.

Test mode

SX1
MENU
BUTTON
SX1 Select ground/pre-ground
SX2 Espresso
SX3 Coffee
SX4 Access to Special Menu
DX1 Clean cycle
DX2 Cappuccino
DX3 Latte macchiato
DX4 Entry to Stand-By
To enter Test Mode:
- Switch on the machine.
- Press the four function keys in the sequence indicated below (SX3, SX2, SX4, SX1) before the
initialization bar is completed.
TITLE
SX1 SX2
INFO1 INFO2
INFO5 INFO6
DX2
The sectors highlighted in yellow on the following screens represent the various loads that can be
activated by pressing the keys indicated in each sector.
This load is deactivated by pressing the same key once more.
The sectors highlighted in green provide information on the sensor status.
Other conditions in which a load can be automatically deactivated are:
- If a work cycle is defi ned and ends (e.g., coffee grinder or brewing unit).
- A time-out is reached (e.g.: 5 sec for the boiler test).
The symbols
mode.
Saeco International Group
SX2 SX3 SX4
OK ESC
MAIN FUNCTION
SX3
INFO3 INFO4
INFO7
DX3 DX4
can be activated with keys SX4 and DX1 and are used to navigate the Test
Menu access (hold down)
OK
ESC
Scroll menu up
Scroll menu down
Entry into Test Mode results in a screen divided into
sections, as illustrated in the diagram below
Rev. 01

05 TROUBLESHOOTING

DX1 DX2 DX3 DX4
SECONDARY FUNCTION
01
Page / 07