Technical Specifi Cations - Saeco TALEA Service Manual

TALEA / ODEA - LINE
2.1. Technical specifi cations
Connection values / power
consumption:
Temperature control:
Safety equipment:
Power output of stainless boiler:
Electrical cup lift
*Talea Touch and Ring Plus only
Tank water level and
residual water tray sensor
Gear motor:
Actively heated cup warmer:
*Talea Touch and Ring Plus only
Pump:
Safety valve:
Water fi lter:
Coffee grinder:
Multi-way valve:
Coffee dose control
Power consumption:
Dimensions: W x H x D in mm:
Weight:
Water tank capacity:
Coffee container fi lling capacity
Dreg drawer capacity
Continuous-fl ow heater capacity:
Water circuit fi lling time:
Heating time:
Grinding time:
Saeco International Group
02 TECHNICAL SPECIFICATIONS
230 V~, 50/60 Hz, 1500 W
Temperature sensor (NTC, 20°C approx. 61 kOhm)
2 safety thermostats, can resist 175°C
1300 W - to dispense coffee, hot water and steam
Stepping motor 24VDC
Capacitive sensor
DC motor with 2 rotating directions (24VDC)
PTC control
Ulka reciprocating piston type pump with thermal safety
100°C
48 W, 230V, 50 Hz, Type EP5 approx. 13-15 bar
Opens at approx. 18-20 bar
in tank
DC motor with
ceramic grinders
15 W
Hall sensor - pulse control. Adjustable
coffee dosage from approx. 7 - 10.5 g set via program.
During heating phase - approx. 5.6 A
300/375/410
approx. 10 kg
approx. 1.7 l.
approx. 250g coffee beans
14
approx. 10 ccm
approx. 15 seconds for fi rst fi lling cycle
approx. 45 seconds
approx. 8-10 seconds
Page 2 / 2