07 DISASSEMBLY
7.5.
Gear motor device
1
B
Page 4 / 13
To disassemble the gears
2
Fig. 1
•
Remove the screws shown.
•
Remove the gear cover.
Caution: The sensor of the residual
water tray is fi tted to the gear cover
(unplug).
Fig. 2
•
If one of the gear wheels is damaged,
replace both wheels.
•
If one of the microswitches is defective,
3
always replace both microswitches.
Fig. 3
•
Gearing mechanism with 2
microswitches.
•
When mounting the large gear wheel,
take care that the arrow on the gear
wheel is aligned to the axis of the
small double toothed gear wheel.
Fig. 4
•
Single micro version.
•
Install as shown in Fig. 3.
4
Fig. 5
•
When assembling the motor, make
sure the bearing is fi tted correctly (L).
L
5
TALEA / ODEA - LINE
Saeco International Group