Blodgett DFG-100 XCEL Installation And Operation Manual page 32

Table of Contents

Advertisement

Available languages

Available languages

Operation
Blodgett IQ2T Control
6. When a cook time expires an alarm sounds.
The top display reads donE. The led for the fin-
ished product lights. All other LEDS are dark.
7. Press the SHELF KEY (18) for the finished
product to silence the alarm. Remove the
product. Close the oven door. The TOP DIS-
PLAY (2) reads --- --- --- ---. The BOTTOM DIS-
PLAY (4) counts down the cook time for the
other product.
8. When the cook time expires an alarm sounds
and the top display reads donE.
9. Press the SHELF KEY (18) to silence the
alarm. Remove the product.
Multiple Batch Cooking Procedure:
This procedure is for single stage recipes with the
same cook temperature and fan speed only.
NOTE: If the led next to the first desired product
key is lit skip step 1.
1. Press the first desired PRODUCT KEY (17).
The LEDS for all recipes with the same cook
temperature and fan speed will light.
The oven preheats to the cook temperature for
the selected product. When the oven reaches
¦10_ of the preheat temperature an alarm
sounds and the bottom display reads LoAd.
NOTE: If high fan is chosen, high rate may be
selected
SWITCH (20).
2. Load the product into the oven. Press the de-
sired PRODUCT KEY (17). If the shelf timing
function is toggled on for that product key, the
top display will read SHLF. Press a SHELF KEY
(18) to assign the product to that shelf and
start the cook cycle. If the shelf timing function
is toggled off for that product key, pressing the
product key will start the cook cycle. The TOP
DISPLAY (2) reads --- --- --- ---. The BOTTOM
DISPLAY (4) counts down the cook time in
minutes: seconds.
3. Load the second product. Press the appropri-
ate PRODUCT KEY (17). Press a SHELF KEY
(18) to activate shelf timing.
NOTE: Only products with lighted LEDS may
be selected.
Oven Cool Down:
1. Close the oven door. Press the COOL DOWN
KEY (8).
NOTE: Cool down cannot be activated with the
oven door open. Once the cool down cycle
has begun the doors may be opened to
speed the cooling process.
28
by toggling
the RATE

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents