Download Print this page
JL Audio Stealthbox SB-H-CIVCPE/12W3v2 Installation Manual
JL Audio Stealthbox SB-H-CIVCPE/12W3v2 Installation Manual

JL Audio Stealthbox SB-H-CIVCPE/12W3v2 Installation Manual

Fits 2001-2003 honda civic coupe, 2-door

Advertisement

Quick Links

®
Stealthbox
I N S T A L L A T I O N G U I D E
for the
SB-H-CIVCPE/12W3v2
(Fits 2001-2003 Honda Civic Coupe,
2-door)
This Stealthbox is a product which
requires professional installation skills and
tools.
Please read this installation guide thor-
oughly before beginning the project. It
will guide you step by step through the
installation. Several of the steps in this
process may require two people to
accomplish.
It is absolutely vital that the enclosure
be properly mounted to the vehicle
according to these instructions. Failure
to mount the enclosure properly pres-
ents two problems: 1) The sub-bass
performance will suffer due to the
movement of the enclosure caused by
the force exerted by the woofer(s) and
2) A loose enclosure presents a serious
safety hazard in the event of a collision
or sudden deceleration.
Please enjoy your JL Audio Stealthbox
responsibly.
w w w . j l a u d i o . c o m
START
HERE
STEP 1: Remove the factory cargo net, net
hooks and the flooring.
*In the next two steps ,you need to plot
two marked locations from measure-
ments. This is to find the proper loca-
tion of the placement of the supplied
wax square.*
STEP 4: Measuring 5.0" (127mm) from the
floor, up to the mark from STEP 4. Mark
location.
S B - H - C I V C P E 2 / 1 2 W 3 v 2 , J L AU D I O, I n c 2 0 0 4
STEP 2: Cut the passenger's side wood floor-
boards ear. Do this outside of the vehicle.
Using a straight edge and marking a line will
help in cutting a straight line.
STEP 5: Measuring 8" (203.22mm) from the
rear of the back rear to the trunk opening,
mark location.
Pa g e 1
STEP 3: Only remove this cargo net hook.
This is on the passenger side of the trunk.
STEP 6: This placement of the wax square is
not going to allow for good adhesion. Using a
heavy duty style tape will help the wax square
to stay into place.
*You do not want the wax square to
move, when placing the Stealthbox
into place, in STEP 9.*
Continued on Next Page ➔
S h e e t S K U # 0 1 1 1 5 8 R ev i s i o n 9 / 1 7 / 2 0 0 4

Advertisement

loading
Need help?

Need help?

Do you have a question about the Stealthbox SB-H-CIVCPE/12W3v2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for JL Audio Stealthbox SB-H-CIVCPE/12W3v2

  • Page 1 Please enjoy your JL Audio Stealthbox responsibly. w w w . j l a u d i o . c o m S B - H - C I V C P E 2 / 1 2 W 3 v 2 , J L AU D I O, I n c 2 0 0 4 ➔...
  • Page 2 Cont. From Previous Page ➔ ➔ STEP 7: Place the second supplied wax square, between the second and the third indentation starting from the front of the vehi- cle(shown with arrows in above picture). The edge of this second supplied wax square should be flush with the edge of the factory trunk linear.
  • Page 3 Cont. Power Handling: 300 Watts JL Audio recommends using a high quality amplifier such as the JL Audio 250/1. The diagram below shows the recommended crossover, infrasonic filter and equalizer settings for the 250/1 when being used to power your Stealthbox®.

This manual is also suitable for:

Stealthbox sb-h-civcpe2/12w3v2Stealthbox sb-h-civcpe2/12w3v3