Polycom CX5500 User Manual page 31

Polycom CX5500 Unified Conference Station for Microsoft Lync User Guide
Call from the Dialer
The dialer displays a list of previously placed calls, as displayed next. To enter a number, tap one of the
dialer entries, or start entering a number. As you enter numbers, the Dialer displays a list of similar
numbers. Tap a number to enter it automatically.
The dialer displaying a list of previously placed calls
To display the dialer:
» Do one of the following:

From Home view, tap New Call.

From Lines or Calls view, tap the New Call soft key. The New Call soft key does not display if
you have an active call.

In Lines view, tap a phone line that does not have any calls.
User Tip: Choosing URLs or numbers mode from the dialer
To enter a URL in the Dialer, tap URL. To exit URL mode and enter numbers, tap Number.
When you access the Dialer during an active call, the call is placed on hold.
To place a call from the Dialer:
» Enter a number, or select a contact and tap
Note: Automatically-placed calls
Your administrator can set up your phone to place calls automatically after you enter a certain
number of digits.
Polycom, Inc.
.
31