Table of Contents
Advertisement
Objects being sucked in can cause severe damage. The use of the supplied FOD screen is
highly recommended as FOD related damage is not covered by the Lifetime Warranty.
Always exercise caution around the hot parts of the turbine, to avoid burns. The outer case at
the turbine stage and nozzle reaches 400 - 500ºC (750 - 950 ºF), while the exhaust gas may
exceed 600º C (1290 ºF).
Make sure that the fuel is mixed with the correct amount of synthetic oil for the specific
engine. Use only 100% synthetic 2 strokes or turbine oils. (See section 2.4 for more
details)
Use common sense when operating model turbine jet aircraft. Never operate in or around
heavily populated areas, and in or around areas experiencing drought or dryness.
6
Advertisement
Table of Contents
