R.P.M. / Thrust
36
34
32
30
28
26
24
22
20
18
16
14
12
10
8
6
4
2
0
32 36 40 44 48 52 56 60
4.10 Last Run Reason
Last power-down cause
The POWERPACK / ECU stores in its internal memory the measurements taken from the
turbine for each 0.5s up to 52 minutes. These measurements are RPM, temperature, throttle
position and pump power. This data can only be downloaded through a PC and a RS232
cable, but the user can check through the HDT the cause of the last power down and the
measures of the engine at the moment when the POWERPACK / ECU cut the engine. This
feature is useful to track the cause of a flame out in flight. After power up, set the trim low and
press the "Menu Down" button. The HDT will show the cause of the last shut down, and the
EGT, RPM and pump power at this moment during 2 sec.
64 68 72 76 80 84 88 92 96 100 104 108 112 116
RPM
Rhino
26