Table of Contents
Advertisement
l
3 mm pressure to turbine
burner
4 mm pressure to turbine main fuel line
4 Programming the POWERPACK / ECU
The HDT has a LCD with 16 characters, 2 rows and four buttons which allow you to move
through the various menus and to change the data settings in each menu page. The
presentation of data has been organized in screens. The first two, displays the engine status
readings in real time and the following screens allow you to modify the operating parameters.
All of the parameters can be modified while the engine is running, so it is easy to tune the
engine without having to start it again to test the new settings. Both left buttons allow you to
move through the different screens in an ascending mode (Menu Up) or descending mode
(Menu Down). Both right buttons allow you to change the data in increasing value (Up Data)
or decreasing value (Down Data).
Menu down
Menu up
6 mm Suction / to fuel tank
Data up/Enter
Data down
17
Advertisement
Table of Contents
