Table of Contents
Advertisement
4.1 First Screen
When you have connected the POWERPACK / ECU and you
turn on the RX, appears briefly the presentation screen with
the brand and model engine.
4.2 Main Screen
This screen displays the status of the turbine temperature (in
degrees Centigrade), RPM and the power supplied to the fuel
pump (PW). This goes from 0 to 999. Note: Numbers
exceeding PW values of 600 may indicate restritctions in the
fuel system or a faulty fuel pump.
4.3 Secondary Screen
When the Menu Up button is selected the secondary screen
is displayed.
Displayed are the pulse width from your transmitter, the % of
the accelerator (throttle) stick, below is the voltage of the
POWERPACK / ECU battery and it's consumption in amps.
4.4 Menu Screen
By pressing the Menu Up button the menu screen will be
displayed.
Displayed are the fourmenus to choose from:
Start
Info
Radio
Run
To acess each menu, simply push the corresponding button.
Start – menu down (
Info – menu up (
Radio – data down ( - )
Run – data up ( + )
)
)
18
Advertisement
Table of Contents
