Table of Contents
Advertisement
Program Features and Options
Press the Down arrow key to position the 'cursor' at the Zone 5 trouble LED which corresponds to the Cana-
14.
dian Supervisory option. Refer to Table 3-6, "Supervisory Alarm - Zone 4 Alarm LED," on page 39
Press the keypad 3 key (Toggle Option) to disable the Canadian Supervisory option. The cursor should blink
15.
at a 1/10 second On and 9/10 second Off rate. The LED will turn off when the cursor is moved off of it
Zone 5
Trouble LED
Press the Enter key to store all of the selected options for the Supervisory Alarms feature and move the pointer
16.
to the next feature
3.5
Program Features and Options
3.5.1 Program Features
There are ten features that are programmable through the MS-2410BC keypad. Table 3-2 lists the programming fea-
tures and the alarm zones which represent each feature.
Program Feature Indicated by Alarm Zone
TABLE 3-2:
Alarm Zone LED Number (red)
1
2
3
4
5
6
7
8
9
10
3.5.2 Programming Options
Each programming feature listed in Table 3-2 has two or more options associated with it. This section describes each
feature and the available options.
Programming Feature
Auto-silence
Silenceable NACs
Walktest (audible/silent)
Supervisory Alarms
Alarm Verification
AC Loss Delay
Option Module Supervision
Number of Annunciators
Trouble Reminder
Silence Inhibit
Document #50801
Rev. B
8/17/98
Down Arrow
Key
P/N 50801:B
37
Advertisement
Table of Contents
