What To Do When Battery Power Gets Low; Returning The Battery To Full Operation; When To Change The Battery; Battery Handling - NEC Versa 6220 Service And Reference Manual

SOLD BY laptopia2005 DO NOT RESELL!!
2-6 Setup and Operation

What to Do When Battery Power Gets Low

When battery power is very low, the power LED flashes amber. When battery power gets
low, do either of the following:
Customers can also buy an optional NEC Versa battery charger to quickly charge the bat-
tery. See the online Versa Tools Catalog for more information.

Returning the Battery to Full Operation

To return the battery to its normal state, try the following:

When to Change the Battery

The following symptoms indicate that battery life is nearing an end. Replace batteries that
display these symptoms.

Battery Handling

Keep the following in mind when removing or replacing a battery.
T
Press the Suspend button to put the system in Suspend mode, remove the battery
pack, and replace it with a fully charged Li-Ion battery.
T
Leave the battery pack in the system and connect your NEC Versa to the AC
adapter and a wall outlet. If you connect the system to AC power and continue to
use it, the battery recharges in approximately 2 hours. If you connect the system
to AC power and do not use it, the battery recharges in about 2 hours.
T
remove and then reinstall the battery.
T
reinstall the battery in the NEC Versa, discharge the battery, then fully recharge
the battery (to 100%) if the battery in use was in storage for an extended period
of time.
T
Shorter work times.
T
Discoloration, warping.
T
Hot to the touch.
T
Strange odor.
T
Use Li-Ion batteries only in the NEC Versa computer for which they are designed.
T
Turn off power to the system after use. Keeping system power on can degrade
battery performance and shorten battery life.
T
Clean the battery terminals with a dry cloth when they get dirty.
T
Keep the battery out of the reach of children.
SOLD BY laptopia2005 DO NOT RESELL!!