Piston Reassembly - MOTO GUZZI V750 IE Workshop Manual

ENGINE
4.8.3.

PISTON REASSEMBLY

•
In reassembling piston to con rod eye, heat piston in oil
bath to about 60°C (140°F), to slightly dilate it so
gudgeon is easier to put back.
•
Insert blocking spring in piston and fit appropriate tool
on piston to insert gudgeon.
•
Position piston with tool attached on the con rod and
screw to insert gudgeon.
•
Remove tool when operation is completed and insert
the second blocking spring of gudgeon seat after
protecting cylinder seat.
NOTE Assembly position is indicated by an arrow to be set
according to rotation direction.
4 - 68
V750 IE