Non-System Parameters (Paras) - Omnia 6EX Installation And Operation Manual

Example: delete 21 <enter> commands the Omnia-6 to remove preset number 21 from the index list.
rename <preset index #><name> Renames the preset by its index number.
Example: rename 21 BOOGY <enter> commands the Omnia-6 to rename preset number 2.
save
Note: Factory presets are permanent and cannot be written over. You must use the 'saveas' command when saving
changes made to a factory preset in order to save it as a unique name.
saveas
Example: saveas BOOGY <enter> Commands the Omnia to save the current settings as preset BOOGY.

Non-System Parameters (paras)

paras
Example: paras <enter> displays the parameters for the current preset:
paravalues <index #>
para <para index #> <paravalue> Sets a new value for the selected parameter.
Saves the preset under its current name.
Saves the preset under a different name.
Lists the modifiable parameters available for the current preset in a table format.
Lists all possible values for the parameter at the given index number.
Omnia-6ex Use and Operation Manual – V: 1.10
98