Omnia 6EX Installation And Operation Manual page 10

Remote Interface:
Power Requirements: Voltage: 100-250 VAC, 50/60/440 Hz., < 75VA
Internal Power Supply: Overvoltage and short circuit protected. Meets EN55022, EN55011
Environmental:
Dimensions:
Shipping Weight:
Telos/Omnia Research and Development is constantly working to improve the quality of our products.
Actual specifications are subject to change or improvement without notice.
Configuration: Eight (8) inputs, RS-232 level-compatible.
Software sensing of both 'go-high' and 'go-low' transitions.
Inputs are protected to +/- 15 VDC.
Connector: EMI suppressed DE-9 male.
Control: User-programmable using built-in Trigger Script feature in
Omnia 6 Remote Control software. Virtually any parameter of
the Omnia 6 may be programmed to change through this interface
feature.
Connector: EMI suppressed IEC male. Detachable 3-wire power cords supplied
for US and European use.
Level B Conducted Emissions. EN61000-4-2, -3, -4, -5, -6 level 3
immunity compliant. Full international safety approval. CE marked.
Operating Temperature: 32 to 122 degrees F / 0 degrees to 50 degrees C for all
operating voltage ranges.
Humidity: 0-95% RH, non-condensing.
19" wide x 5.25" high x 16" deep (48.26cm wide x 13.335 cm high x
40.64 cm deep) including connectors. Unit requires three EIA rack
spaces for proper mounting.
35 lbs. / 15.876 kg
Omnia-6ex Use and Operation Manual – V: 1.10
10