E82: Error In Reading The Reset/Off Position Of The Programme Selector - Electrolux EWM2100 Service Manual

E82: Error in reading the RESET/OFF position of the programme
E82
Reading of position "0" of the selector when the appliance is switched on, or configuration
Tests to be performed:
Switch the appliance OFF
(selector position "0").
Do any LEDs light?
YES
Replace the circuit board
and restart the diagnostic
cycle to check for further
alarms.
03-2009 SOI/DT-mdm FCPD-dp Quality-fz
selector
error
NO
Switch the appliance on and
turn the programme selector (in
the versions with knob),
push the programe buttons
(INPUT version)
to every position: wait at least
10 seconds before passing to
the next one.
Does alarm E82 reappear?
Replace the circuit board and
restart the diagnostic cycle to
check for further alarms.
66/91
NO
YES
If there are traces of burning on the
circuit board, refer to page
E82
Restart the diagnostic
cycle to check for
further alarms.
90
599 70 56-70