Triumph Accessory D-Lock Storage - Triumph Tiger 800 User Manual

To attach a helmet to the motorcycle, remove
the seat and loop the helmet chin strap over
the hook. Ensure the flat area above the hook
is not obstructed by the helmet strap, as this
will prevent the rear seat engaging correctly.
1
cgif
1. Helmet hook flat area
To secure the helmet, re-fit the seat and lock
into position.
Warning
Never ride the motorcycle with helmet(s)
secured to the helmet hook. Riding the
motorcycle with helmet(s) secured to the
helmet hook may cause the motorcycle to
become unstable leading to loss of control
and an accident.
Caution
Do not allow helmets to rest against a hot
silencer. The helmet may be damaged.
General Information
Triumph Accessory D-lock
Storage
Space is provided under the rear seat to store
a Triumph accessory D-lock (available from
your Triumph dealer).
Secure the lock as follows:
Release the strap securing the tool kit.
Position the U-section of the lock to the rear
mudguard support features, ensuring the
open end faces towards the rear of the
motorcycle.
Secure the U-section using the tool kit strap
as shown below.
Position the lock body to the tray in the rear
mudguard.
Refit the rear seat to secure the lock body.
3
2
4
cgir
1. Lock U-section
2. Rear mudguard lock support features
3. Tool kit strap (tool kit shown
removed for clarity)
4. Lock body
2
1
49