Charger Compatibility; Charger Display Module Installation - Motorola IMPRES Installation Manual

CHARGER COMPATIBILITY

The Charger Display Module (CDM), P/N
RLN5382, can be installed in any of the following
existing IMPRES Adaptive Multi-Unit Chargers:
WPLN4108
WPLN4109
WPLN4110
WPLN4118
In addition, the CDM can be installed as a
replacement for any of the following IMPRES
Adaptive Multi-Unit Chargers with displays:
WPLN4127
WPLN4130
WPLN4131
WPLN4132

CHARGER DISPLAY MODULE INSTALLATION

It is recommended that qualified self-maintained
users, independent service shops, or the Motorola
Service Depot complete installation of the CDM.
To quickly and easily install the CDM, refer to the
diagrams and information in the steps that follow.
Required Tools:
• Torque driver capable of delivering 8 and
10 in-lbs
• #10 Torx bit, P/N 6680387A74
• #20 Torx bit, P/N 6680387A76
WPLN4119
WPLN4120
WPLN4121
WPLN4123
WPLN4133
WPLN4134
WPLN4135
WPLN4136
5